|
We
provide custom solutions for your data acquisition
requirements, either one-offs or OEM. For our sensors,
we use our own boards too. PCI and ISA architectures are
available, from frame grabbers to I/O boards or any
special function requirement.
The
main advantage of going into a custom solution is that
an application-specific R&D or production problem
can be addressed without compromising on the solution.
We supply the set of Gerber files for the board,
firmware and source code examples.
| ISA
configurations features |
- 8
or 16-bit data bus.
- DMA
capability.
- Up
to 3 hardware interrupts.
- Provides
-12V, +12V, +5V for peripherals.
- Both
memory and port accesses.
- 2-layer
circuit boards.
- Access
under DOS and Windows, no custom drivers
required.
|
| PCI
configuration features |
- 32-bit data bus, 5V or
3.3V slots.
- One
hardware interrupt.
- Provides
up to 7W of power for peripherals -12V, +12V,
+5V.
- 4-layer
circuit boards.
- Up
to 4 devices on the same bus.
- Port
accesses, memory accesses in both below 1-Mb
or in the 32-bit memory space.
- No
DMA
- Ports
and memory below 1Mb can be accessed under
DOS.
- 32-bit
memory space access under DOS in the DOS
Protected Mode (DPMI) with a 32-bit DOS
extender, no custom drivers required.
- Access
under Windows, for some applications no custom
drivers required
|
|
